TP-Link TL-SG5426 User Guide - Page 450
Default Setting, Command Mode, Command Usage, Example, Related Commands, Syntax, ip igmp snooping vlan
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 450 highlights
4 Multicast Filtering Commands Default Setting 300 seconds Command Mode Global Configuration Command Usage The switch must use IGMPv2 for this command to take effect. Example The following shows how to configure the default timeout to 300 seconds: Console(config)#ip igmp snooping router-port-expire-time 300 Console(config)# Related Commands ip igmp snooping version (4-203) Static Multicast Routing Commands Table 4-70 Static Multicast Routing Commands Command Function ip igmp snooping vlan mrouter Adds a multicast router port show ip igmp snooping mrouter Shows multicast router ports Mode GC Page 4-209 PE 4-210 ip igmp snooping vlan mrouter This command statically configures a multicast router port. Use the no form to remove the configuration. Syntax [no] ip igmp snooping vlan vlan-id mrouter interface • vlan-id - VLAN ID (Range: 1-4094) • interface • ethernet unit/port - unit - Stack unit. (Range: Unit 1) - port - Port number. (Range: 1-26) • port-channel channel-id (Range: 1-4) Default Setting No static multicast router ports are configured. Command Mode Global Configuration 4-209