TP-Link TL-SG5426 User Guide - Page 447

4 Command Line Interface IGMP Query Commands (Layer 2) Table 4-69 IGMP Query Commands (Layer 2) Command Function Mode ip igmp snooping querier Allows this device to act as the querier for IGMP snooping GC ip igmp snooping Configures the query count GC query-count ip igmp snooping Configures the query interval GC query-interval ip igmp snooping Configures the report delay GC query-max-response-time ip igmp snooping Configures the query timeout GC router-port-expire-time Page 4-206 4-206 4-207 4-208 4-208 ip igmp snooping querier This command enables the switch as an IGMP querier. Use the no form to disable it. Syntax [no] ip igmp snooping querier Default Setting Enabled Command Mode Global Configuration Command Usage If enabled, the switch will serve as querier if elected. The querier is responsible for asking hosts if they want to receive multicast traffic. Example Console(config)#ip igmp snooping querier Console(config)# ip igmp snooping query-count This command configures the query count. Use the no form to restore the default. Syntax ip igmp snooping query-count count no ip igmp snooping query-count count - The maximum number of queries issued for which there has been no response before the switch takes action to drop a client from the multicast group. (Range: 2-10) 4-206