TP-Link TL-SG5426 User Guide - Page 378
Default Setting, Command Mode, Example, Table 4-47, show lacp counters - display description
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 378 highlights
4 Link Aggregation Commands Default Setting Port Channel: all Command Mode Privileged Exec Example Console#show lacp 1 counters Port channel : 1 Eth 1/ 1 LACPDUs Sent : 21 LACPDUs Received : 21 Marker Sent : 0 Marker Received : 0 LACPDUs Unknown Pkts : 0 ... LACPDUs Illegal Pkts : 0 Table 4-47 show lacp counters - display description Field Description LACPDUs Sent Number of valid LACPDUs transmitted from this channel group. LACPDUs Received Number of valid LACPDUs received on this channel group. Marker Sent Number of valid Marker PDUs transmitted from this channel group. Marker Received Number of valid Marker PDUs received by this channel group. LACPDUs Unknown Pkts Number of frames received that either (1) Carry the Slow Protocols Ethernet Type value, but contain an unknown PDU, or (2) are addressed to the Slow Protocols group MAC Address, but do not carry the Slow Protocols Ethernet Type. LACPDUs Illegal Pkts Number of frames that carry the Slow Protocols Ethernet Type value, but contain a badly formed PDU or an illegal value of Protocol Subtype. Console#show lacp 1 internal Port channel : 1 Oper Key : 4 Admin Key : 0 Eth 1/1 LACPDUs Internal : 30 sec LACP System Priority : 32768 LACP Port Priority : 32768 Admin Key : 4 Oper Key : 4 Admin State : defaulted, aggregation, long timeout, LACP-activity Oper State : distributing, collecting, synchronization, aggregation, ... long timeout, LACP-activity 4-137