TP-Link TL-SG5426 User Guide - Page 334
Related Commands, Syntax, show ip access-list, standard, extended, Command Mode, Example
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
4 Access Control List Commands This allows TCP packets from class C addresses 192.168.1.0 to any destination address when set for destination TCP port 80 (i.e., HTTP). Console(config-ext-acl)#permit 192.168.1.0 255.255.255.0 any destination-port 80 Console(config-ext-acl)# Related Commands access-list ip (4-90) show ip access-list This command displays the rules for configured IP ACLs. Syntax show ip access-list {standard | extended} [acl_name] • standard - Specifies a standard IP ACL. • extended - Specifies an extended IP ACL. • acl_name - Name of the ACL. (Maximum length: 16 characters) Command Mode Privileged Exec Example Console#show ip access-list standard IP standard access-list david: permit host 10.1.1.21 permit 168.92.0.0 255.255.255.0 Console# Related Commands permit, deny 4-91 ip access-group (4-93) ip access-group This command binds a port to an IP ACL. Use the no form to remove the port. Syntax [no] ip access-group acl_name in • acl_name - Name of the ACL. (Maximum length: 16 characters) • in - Indicates that this list applies to ingress packets. Default Setting None Command Mode Interface Configuration (Ethernet) 4-93