TP-Link TL-SG5426 User Guide - Page 211
Assigning Ports to Multicast Services, Command Usage, Command Attributes, Interface, VLAN ID
UPC - 845973020729
View all TP-Link TL-SG5426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
3 Configuring the Switch Web - Click IGMP Snooping, IP Multicast Registration Table. Select a VLAN ID and the IP address for a multicast service from the scroll-down lists. The switch will display all the interfaces that are propagating this multicast service. Figure 3-101 IP Multicast Registration Table CLI - This example displays all the known multicast services supported on VLAN 1, along with the ports propagating the corresponding services. The Type field shows if this entry was learned dynamically or was statically configured. Console#show bridge 1 multicast vlan 1 VLAN M'cast IP addr. Member ports Type 1 224.1.1.12 Eth1/12 USER 1 224.1.2.3 Eth1/12 IGMP Console# 4-205 Assigning Ports to Multicast Services Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages as described in "3-163. For certain applications that require tighter control, you may need to statically configure a multicast service on the switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the multicast service to that VLAN group. Command Usage • Static multicast addresses are never aged out. • When a multicast address is assigned to an interface in a specific VLAN, the corresponding traffic can only be forwarded to ports within that VLAN. Command Attributes • Interface - Activates the Port or Trunk scroll down list. • VLAN ID - Selects the VLAN to propagate all multicast traffic coming from the attached multicast router/switch. • Multicast IP - The IP address for a specific multicast service • Port or Trunk - Specifies the interface attached to a multicast router/switch. 3-168