Cisco RV042 User Guide - Page 75
Configuration of Router B
UPC - 745883560530
View all Cisco RV042 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Appendix D 7. For the Local Security Gateway Type, select IP Only. The WAN IP address of Router A will be automatically detected. For the Local Security Group Type, select Subnet. Enter Router A's local network settings in the IP Address and Subnet Mask fields. IPSec NAT Traversal For the Local Security Group Type, select Subnet. Enter Router B's local network settings in the IP Address and Subnet Mask fields. Router A's IPSec VPN Settings 8. For the Remote Security Gateway Type, select IP Only. Enter Router B's WAN IP address in the IP Address field. 9. For the Remote Security Group Type, select Subnet. Enter Router B's local network settings in the IP Address and Subnet Mask fields. 10. In the IPSec Setup section, select the appropriate encryption, authentication, and other key management settings. 11. In the Preshared Key field, enter a string for this key, for example, 13572468. 12. If you need more detailed settings, click Advanced Settings. Otherwise, click Save Settings and proceed to the next section, "Configuration of Router B." Configuration of Router B Follow these instructions for Router B. 1. Launch the web browser for a networked computer, designated PC 2. 2. Access the web-based utility of Router B. (Refer to the User Guide of the RVL200 for details.) 3. Click the IPSec VPN tab. 4. Click the Gateway to Gateway tab. 5. Enter a name in the Tunnel Name field. 6. For the VPN Tunnel setting, select Enable. 7. For the Local Security Gateway Type, select IP Only. The WAN IP address of Router B will be automatically detected. Router B's IPSec VPN Settings 8. For the Remote Security Gateway Type, select IP Only. Enter the WAN IP address of NAT 2 - RV042 in the IP Address field. 9. For the Remote Security Group Type, select Subnet. Enter Router A's local network settings in the IP Address and Subnet Mask fields. 10. In the IPSec Setup section, select the appropriate encryption, authentication, and other key management settings. 11. In the Preshared Key field, enter a string for this key, for example, 13572468. 12. If you need more detailed settings, click Advanced Settings. Otherwise, click Save Settings. 10/100 4-Port VPN Router 68