HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 116
monitor-port, By default, a port does not serve any mirroring group as the monitor port.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
monitor-port Syntax [ mirroring-group group-id ] monitor-port View undo [ mirroring-group group-id ] monitor-port Interface view Default level 2: System level Parameters mirroring-group group-id: Specifies a local or remote destination group by its number, which ranges from 1 to 4 and defaults to 1. The mirroring group specified by group-id must already exist. Description Use monitor-port to assign the current port to a local or remote destination group as the monitor port. Use undo monitor-port to remove the current port from the mirroring group. By default, a port does not serve any mirroring group as the monitor port. You cannot configure a monitor port for a remote source group. You cannot configure a source port of an existing mirroring group as a monitor port. Related commands: mirroring-group. Examples # Create local mirroring group 1, and configure GigabitEthernet 1/0/1 as its monitor port. system-view [Sysname] mirroring-group 1 local [Sysname] interface GigabitEthernet 1/0/1 [Sysname-GigabitEthernet1/0/1] monitor-port # Create remote destination group 2, and configure GigabitEthernet 1/0/2 as its monitor port. system-view [Sysname] mirroring-group 2 remote-destination [Sysname] interface GigabitEthernet 1/0/2 [Sysname-GigabitEthernet1/0/2] monitor-port 110