HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 36
display info-center
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
channel number:0, channel name:console MODU_ID NAME ENABLE LOG_LEVEL ffff0000 default Y informational ENABLE TRAP_LEVEL Y debugging ENABLE DEBUG_LEVEL Y debugging The output shows that the system is allowed to output log information with a severity from 0 to 4, trap information with a severity from 0 to 7, and debug information with a severity from 0 to 7 to the console. The information source modules are all modules (default). Table 8 Command output Field channel number channel name MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL Description Channel number, in the range of 0 to 9. Channel name. For more information, see info-center channel name. ID of the source module. Name of the source module. "default" means all modules are allowed to output system information, but the actual permitted modules depends on the switch model. Indicates whether log output is enabled, Y or N. Log information severity. See Table 10 for details. Indicates whether trap output is enabled, Y or N. Trap information severity See Table 10 for details. Indicates whether debug output is enabled, Y or N. Debug information severity. See Table 10 for details. display info-center Syntax View display info-center [ | { begin | exclude | include } regular-expression ] Any view Default level 1: Monitor level Parameters |: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide. begin: Displays the first line that matches the specified regular expression and all lines that follow. exclude: Displays all lines that do not match the specified regular expression. include: Displays all lines that match the specified regular expression. regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display info-center to display information center configuration information. 30