HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 150
reaction checked-element icpif
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
reaction checked-element icpif Syntax reaction item-number checked-element icpif threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ] View undo reaction item-number Voice operation view Default level 2: System level Parameters item-number: Specifies a reaction entry ID, in the range of 1 to 10. threshold-value: Specifies threshold values. upper-threshold: Specifies an upper threshold, in the range of 1 to 100. lower-threshold: Specifies a lower threshold, in the range of 1 to 100. It must not be greater than the upper threshold. action-type: Specifies what action to be triggered to react to certain measurement conditions and it defaults to none. none: Specifies to only record events for terminal display, and not to send any trap messages. trap-only: Specifies to record events and send SNMP trap messages. Description Use reaction checked-element icpif to configure a reaction entry for monitoring the ICPIF value in a voice test of an NQA operation. You cannot edit a reaction entry. To change the attributes in a reaction entry, use undo reaction to delete this entire entry and start over. Use undo reaction to delete the specified reaction entry. By default, no reaction entry for monitoring ICPIF values is configured. Examples # Create reaction entry 1 for monitoring the ICPIF value in each voice test. Set the upper threshold to 50 and lower threshold to 5. Before the NQA test group starts, the initial state of the reaction entry is invalid. After each test, the ICPIF value is checked. If it is out of the threshold range, the state of the reaction entry is set to over-threshold. Otherwise, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the network management server. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type voice [Sysname-nqa-admin-test-voice] reaction 1 checked-element icpif threshold-value 50 5 action-type trap-only 144