HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 37
Examples, Table 9, Command output
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Examples # Display information center configuration information. display info-center Information Center:enabled Log host: 1.1.1.1, port number : 514, host facility : local7, channel number : 2, channel name : loghost Console: channel number : 0, channel name : console Monitor: channel number : 1, channel name : monitor SNMP Agent: channel number : 5, channel name : snmpagent Log buffer: enabled,max buffer size 1024, current buffer size 512, current messages 512, dropped messages 0, overwritten messages 740 channel number : 4, channel name : logbuffer Trap buffer: enabled,max buffer size 1024, current buffer size 256, current messages 216, dropped messages 0, overwritten messages 0 channel number : 3, channel name : trapbuffer syslog: channel number:6, channel name:channel6 Information timestamp setting: log - date, trap - date, debug - date, loghost - date Table 9 Command output Field Information Center Log host: 1.1.1.1, port number : 514, host facility : local2, channel number : 8, channel name : channel8 Console: channel number : 0, channel name : console Monitor: channel number : 1, channel name : monitor Description Information center state, including: • enabled-Logs can be output to the information center. • disabled-Logs cannot be output to the information center. Configurations on the log host destination (which can be displayed only when the info-center loghost command is configured), including IP address of the log host, number of the port that receives the system information on the log host, logging facility used, and the channel number and channel name used.) Configurations on the console destination, including the channel number and channel name used. Configurations on the monitor terminal destination, including the channel number and channel name used. 31