HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 122
destination port, display nqa history
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Description Use destination ip to configure a destination IP address for a test operation. Use undo destination ip to remove the configured destination IP address. By default, no destination IP address is configured for a test operation. Examples # Configure the destination IP address of an ICMP echo test operation as 10.1.1.1. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1 destination port Syntax destination port port-number View undo destination port TCP, UDP echo, UDP jitter, voice operation view Default level 2: System level Parameters port-number: Specifies the destination port number of a test operation, in the range of 1 to 65535. Description Use destination port to configure a destination port number for a test operation. Use undo destination port to remove the configured destination port number. By default, no destination port number is configured for a test operation. Do not perform a UDP jitter test and a voice test on ports from 1 to 1023 (known ports). Otherwise, the NQA test fails or the corresponding services of this port are unavailable. Examples # Configure the destination port number of a test operation as 9000. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type udp-echo [Sysname-nqa-admin-test-udp-echo] destination port 9000 display nqa history Syntax View display nqa history [ admin-name operation-tag ] [ | { begin | exclude | include } regular-expression ] Any view 116