HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 58
terminal trapping
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
View undo terminal monitor User view Default level 1: Monitor level Parameters None Description Use terminal monitor to enable the monitoring of system information on the current terminal. Use undo terminal monitor to disable the monitoring of system information on the current terminal. By default, monitoring of the system information is enabled on the console and disabled on the current terminal. Configure the terminal monitor command before you can display the log, trap, and debugging information. The undo terminal monitor command automatically disables the monitoring of log, trap, and debugging information. The configuration of this command is only valid for the current connection between the terminal and the switch. If a new connection is established, the monitoring of system information on the terminal restores the default. Examples # Enable the monitoring of system information on the current terminal. terminal monitor Info: Current terminal monitor is on. terminal trapping Syntax terminal trapping View undo terminal trapping User view Default level 1: Monitor level Parameters None Description Use terminal trapping to enable the display of trap information on the current terminal. Use undo terminal trapping to disable the display of trap information on the current terminal. By default, the display of trap information is enabled on both the current terminal and the console. 52