HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 141

nqa, to remove the test group.

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 141 highlights

Description Use next-hop to configure the next hop IP address for ICMP echo requests of a test group. Use undo next-hop to remove the configured next hop IP address. By default, no next hop IP address is configured. Examples # Configure the next hop IP address as 10.1.1.1. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1 nqa Syntax nqa entry admin-name operation-tag View undo nqa { all | entry admin-name operation-tag } System view Default level 2: System level Parameters admin-name: Specifies the name of the NQA test group administrator who creates the NQA test operation, a case-insensitive string of 1 to 32 characters, with "-" excluded. operation-tag: Specifies the tag of a test operation, a case-insensitive string of 1 to 32 characters, with "-" excluded. all: Removes all NQA test groups. Description Use nqa to create an NQA test group and enter NQA test group view. Use undo nqa to remove the test group. If the operation has been configured for the test group, you directly enter NQA operation view when you execute the nqa command. Examples # Create an NQA test group whose administrator name is admin and whose operation tag is test and enter NQA test group view. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] 135

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
135
Description
Use
next-hop
to configure the next hop IP address for ICMP echo requests of a test group.
Use
undo next-hop
to remove the configured next hop IP address.
By default, no next hop IP address is configured.
Examples
# Configure the next hop IP address as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
nqa
Syntax
nqa
entry
admin-name
operation-tag
undo nqa
{
all
|
entry
admin-name
operation-tag
}
View
System view
Default level
2: System level
Parameters
admin-name
: Specifies the name of the NQA test group administrator who creates the NQA test
operation, a case-insensitive string of 1 to 32 characters, with "-" excluded.
operation-tag
: Specifies the tag of a test operation, a case-insensitive string of 1 to 32 characters, with
"-" excluded.
all
: Removes all NQA test groups.
Description
Use
nqa
to create an NQA test group and enter NQA test group view.
Use
undo
nqa
to remove the test group.
If the operation has been configured for the test group, you directly enter NQA operation view when you
execute the
nqa
command.
Examples
# Create an NQA test group whose administrator name is
admin
and whose operation tag is
test
and
enter NQA test group view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]