HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 164

statistics hold-time, statistics max-group

Page 164 highlights

Description Use source port to configure the source port of probe packets. Use undo source port to remove the configured port number. By default, no source port number is configured. Examples # Configure port 8000 as the source port of probe packets in the UDP echo test group. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type udp-echo [Sysname-nqa-admin-test-udp-echo] source port 8000 statistics hold-time Syntax statistics hold-time hold-time View undo statistics hold-time DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice operation view Default level 2: System level Parameters hold-time: Specifies the hold time of a statistics group in minutes, in the range of 1 to 1440. Description Use statistics hold-time to configure the hold time of statistics groups for a test group. A statistics group is deleted when its hold time expires. Use undo statistics hold-time to restore the default. By default, the hold time of a statistics group is 120 minutes. This command is not supported by DHCP tests. Examples # Configure the hold time of a statistics group as 3 minutes. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3 statistics max-group Syntax statistics max-group number undo statistics max-group 158

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

158
Description
Use
source port
to configure the source port of probe packets.
Use
undo source port
to remove the configured port number.
By default, no source port number is configured.
Examples
# Configure port 8000 as the source port of probe packets in the UDP echo test group.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] source port 8000
statistics hold-time
Syntax
statistics hold-time
hold-time
undo statistics hold-time
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice operation view
Default level
2: System level
Parameters
hold-time
: Specifies the hold time of a statistics group in minutes, in the range of 1 to 1440.
Description
Use
statistics hold-time
to configure the hold time of statistics groups for a test group. A statistics group
is deleted when its hold time expires.
Use
undo statistics hold-time
to restore the default.
By default, the hold time of a statistics group is 120 minutes.
This command is not supported by DHCP tests.
Examples
# Configure the hold time of a statistics group as 3 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3
statistics max-group
Syntax
statistics max-group
number
undo statistics max-group