HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 167
type, Specifies an HTTP test.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Parameters value: Specifies the maximum number of hops that a probe packet traverses in the network, in the range of 1 to 255. Description Use ttl to configure the maximum number of hops that a probe packet traverses in the network. Use undo ttl to restore the default. By default, the maximum number of hops that a probe packet can traverse in a network is 20. After you configure the route-option bypass-route command, the maximum number of hops that a probe packet traverses in the network is 1, and the ttl command does not take effect. Examples # Configure the maximum number of hops that a probe packet can traverse in a network as 16. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] ttl 16 type Syntax View type { dhcp | dlsw | dns | ftp | http | icmp-echo | snmp | tcp | udp-echo | udp-jitter | voice } NQA test group view Default level 2: System level Parameters dhcp: Specifies a DHCP test. dlsw: Specifies a DLSw test. dns: Specifies a DNS test. ftp: Specifies an FTP test. http: Specifies an HTTP test. icmp-echo: Specifies an ICMP echo test. snmp: Specifies an SNMP test. tcp: Specifies a TCP test. udp-echo: Specifies a UDP echo test. udp-jitter: Specifies a UDP jitter test. voice: Specifies a voice test. Description Use type to configure the test type of the current test group and enter operation view. By default, no test type is configured. 161