HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 178
sflow counter collector, sflow flow collector
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
sflow counter collector Syntax sflow counter collector collector-id View undo sflow counter collector Layer 2 Ethernet interface view Default level 2: System level Parameters collector-id: Specifies the ID of the sFlow collector. Description Use sflow counter collector to specify the sFlow collector for counter sampling. Use undo sflow counter collector to remove the sFlow collector for counter sampling. By default, no sFlow collector is specified for counter sampling. This command is supported only on physical Ethernet interfaces, but not on logical interfaces (such as VLAN interfaces). Examples # Specify sFlow collector 2 on gigabitethernet 1/0/1 for counter sampling. system-view [Sysname] interface gigabitethernet 1/0/1 [Sysname-GigabitEthernet1/0/1] sflow counter collector 2 sflow flow collector Syntax sflow flow collector collector-id View undo sflow flow collector Layer 2 Ethernet interface view Default level 2: System level Parameters collector-id: Specifies the ID of the sFlow collector. Description Use sflow flow collector to specify the sFlow collector for flow sampling. Use undo sflow flow collector to remove the sFlow collector configured for flow sampling. By default, no sFlow collector is specified for flow sampling. 172