HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 121
description (any NQA operation view), destination ip
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Examples # Configure the size of the data field in an ICMP echo request as 80 bytes. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] data-size 80 description (any NQA operation view) Syntax description text View undo description Any NQA operation view Default level 2: System level Parameters text: Specifies a case-sensitive string of 1 to 200 characters, used to describe a test group. Description Use description to give a brief description of a test group, usually, the test type or test purpose of a test group. Use undo description to remove the configured description information. By default, no descriptive string is available for a test group. Examples # Configure the descriptive string for a test group as icmp-probe. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] description icmp-probe destination ip Syntax destination ip ip-address View undo destination ip DLSw, FTP, DNS, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice operation view Default level 2: System level Parameters ip-address: Specifies the destination IP address of a test operation. 115