HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 31
ntp-service multicast-server, ntp-service reliable authentication-keyid
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ntp-service multicast-server Syntax ntp-service multicast-server [ ip-address ] [ authentication-keyid keyid | ttl ttl-number | version number ] * View undo ntp-service multicast-server [ ip-address ] VLAN interface view Default level 3: Manage level Parameters ip-address: Sets a multicast IP address, which defaults to 224.0.1.1. authentication-keyid keyid: Specifies the key ID to be used for sending multicast messages to multicast clients, where keyid is in the range of 1 to 4294967295. This parameter is not meaningful if authentication is not required. ttl ttl-number: Specifies the TTL of NTP multicast messages, where ttl-number is in the range of 1 to 255 and defaults to 16. version number: Specifies the NTP version, where number is in the range of 1 to 4 and defaults to 3. Description Use ntp-service multicast-server to configure the device to operate in NTP multicast server mode and use the current interface to send NTP multicast packets. Use undo ntp-service multicast-server to remove the configuration. By default, the device does not operate in any NTP operation mode. Examples # Configure the device to operate in multicast server mode and send NTP multicast messages on VLAN-interface 1 to the multicast address 224.0.1.1, using key 4 for encryption, and set the NTP version to 3. system-view [Sysname] interface vlan-interface 1 [Sysname-Vlan-interface1] ntp-service multicast-server 224.0.1.1 version 3 authentication-keyid 4 ntp-service reliable authentication-keyid Syntax ntp-service reliable authentication-keyid keyid View undo ntp-service reliable authentication-keyid keyid System view Default level 3: Manage level 25