HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 138
history-record keep-time, history-record number
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
By default, history records of an NQA test group are not saved. If the history records saving function is enabled, the system saves the history records. To view the history records of the NQA test group, use the display nqa history command. If the history records saving function is disabled, the system does not save the history records of the NQA test group and the existing history records are also removed. Related commands: display nqa history. Examples # Enable the history records saving function of an NQA test group. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] history-record enable history-record keep-time Syntax history-record keep-time keep-time View undo history-record keep-time Any NQA operation view Default level 2: System level Parameters keep-time: Specifies how long the history records can be saved. The time is in the range of 1 to 1440 minutes. Description Use history-record keep-time to set the lifetime of the history records in an NQA test group. Use undo history-record keep-time to restore the default. By default, the history records in an NQA test group are kept for 120 minutes. When an NQA test completes, the timing starts. All the records are removed when the lifetime is reached. Examples # Configure the lifetime of the history records in an NQA test group as 100 minutes. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] history-record keep-time 100 history-record number Syntax history-record number number 132