HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 140
mode, next-hop
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
[Sysname] nqa entry admin test [Sysname-nqa-admin-test] type http [Sysname-nqa-admin-test-http] http-version v1.0 mode Syntax mode { active | passive } View undo mode FTP operation view Default level 2: System level Parameters active: Sets the data transmission mode to active for FTP tests. In this mode, the FTP server initiates a data connection request. passive: Sets the data transmission mode to passive for FTP tests. In this mode, a client initiates a data connection request. Description Use mode to set the data transmission mode for FTP tests. Use undo mode to restore the default. By default, the data transmission mode is active. Examples # Set the data transmission mode to passive for FTP tests. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type ftp [Sysname-nqa-admin-test-ftp] mode passive next-hop Syntax next-hop ip-address View undo next-hop ICMP echo operation view Default level 2: System level Parameters ip-address: Specifies the IP address of the next hop. 134