HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 13

Reply from 2001::1 bytes=56 Sequence=1 hop limit=64 Reply from 2001::1 bytes=56 Sequence=2 hop limit=64 Reply from 2001::1 bytes=56 Sequence=3 hop limit=64 Reply from 2001::1 bytes=56 Sequence=4 hop limit=64 Reply from 2001::1 bytes=56 Sequence=5 hop limit=64 time = 62 ms time = 26 ms time = 20 ms time = 4 ms time = 16 ms --- 2001::2 ping statistics --5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 4/25/62 ms The "hop limit" field in this prompt information has the same meaning as the "ttl" field in the prompt information displayed by the IPv4 ping command, indicating the TTL value in the ICMPv6 echo request. For a description of other fields, see Table 1. tracert Syntax View tracert [ -a source-ip | -f first-ttl | -m max-ttl | -p port | -q packet-number | -tos tos | -vpn-instance vpn-instance-name | -w timeout ] * host Any view Default level 0: Visit level Parameters -a source-ip: Specifies the source IP address of a tracert packet. It must be a legal IP address configured on the device. If this option is not specified, the source IP address of an ICMP echo request is the primary IP address of the outbound interface of the tracert packet. -f first-ttl: Specifies the first TTL (the allowed number of hops for the first packet). It is in the range of 1 to 255 and defaults to 1, and must be less than the maximum TTL. -m max-ttl: Specifies the maximum TTL, or, the maximum allowed number of hops for a packet. It is in the range of 1 to 255 and defaults to 30, and must be greater than the first TTL. -p port: Specifies the UDP port number of the destination, which is in the range of 1 to 65535 and defaults to 33434. You do not need to modify this option. -q packet-number: Specifies the number of probe packets sent each time, which is in the range of 1 to 65535 and defaults to 3. -tos tos: Specifies the ToS value for a tracert packet, which is in the range of 0 to 255 and defaults to 0. 7