HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 86

Examples # Configure the holding time of traps in the queue as 60 seconds. system-view [Sysname] snmp-agent trap life 60 snmp-agent trap queue-size Syntax snmp-agent trap queue-size size View undo snmp-agent trap queue-size System view Default level 3: Manage level Parameters size: Specifies the number of traps that can be stored in the trap sending queue, in the range of 1 to 1000. Description Use snmp-agent trap queue-size to set the size of the trap sending queue. Use undo snmp-agent trap queue-size to restore the default queue size. By default, up to 100 traps can be stored in the trap sending queue. Traps are saved into the trap sending queue when generated. The size of the queue determines the maximum number of traps that can be stored in the queue. When the size of the trap sending queue reaches the configured value, the newly generated traps are saved into the queue, and the earliest ones are discarded. Related commands: snmp-agent target-host, snmp-agent trap enable, and snmp-agent trap life. Examples # Set the maximum number of traps that can be stored in the trap sending queue to 200. system-view [Sysname] snmp-agent trap queue-size 200 snmp-agent trap source Syntax snmp-agent trap source interface-type interface-number View undo snmp-agent trap source System view Default level 3: Manage level 80