HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 119
data-fill
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
View Voice operation view Default level 2: System level Parameters g711a: Specifies a G.711 A-law codec type. g711u: Specifies a G.711 μ-law codec type g729a: Specifies a G.729 A-law codec type. Description Use codec-type to configure the codec type for a voice test. Use undo codec-type to restore the default. By default, the codec type for a voice test is G.711 A-law. Examples # Configure the codec type for a voice test as g729a. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type voice [Sysname-nqa-admin-test-voice] codec-type g729a data-fill Syntax data-fill string View undo data-fill ICMP echo, UDP echo, UDP jitter, voice operation view Default level 2: System level Parameters string: Specifies a case-sensitive string of 1 to 200 characters. Description Use data-fill to configure the string to be filled in the data field of a probe packet. Use undo data-fill to restore the default. By default, the string is the hexadecimal number 00010203040506070809. • If the data field length is smaller than the string length, only the first part of the string is filled. For example, if you configure the string as abcd and the data field size as 3 bytes, abc is filled. • If the data field length is greater than the string length, the system fills the data field with the string cyclically until the data field is full. For example, if you configure the string as abcd and the data field size as 6 bytes, abcdab is filled. 113