HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 166
tos, ttl, DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice, DHCP operation view
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
This command is not supported by DHCP tests. Examples # Configure the interval for collecting the test result statistics of an ICMP test group as 2 minutes. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] statistics interval 2 tos Syntax tos value View undo tos DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice, DHCP operation view Default level 2: System level Parameters value: Specifies the value of the ToS (Type of Service) field in the IP header in an NQA probe packet, in the range of 0 to 255. Description Use tos to configure the value of the ToS field in the IP header in an NQA probe packet. Use undo tos to restore the default. By default, the ToS field in the IP header of an NQA probe packet is 0. Examples # Configure the ToS field in an IP packet header in an NQA probe packet as 1. system-view [Sysname] nqa entry admin test [Sysname-nqa-admin-test] type icmp-echo [Sysname-nqa-admin-test-icmp-echo] tos 1 ttl Syntax ttl value View undo ttl DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice operation view Default level 2: System level 160