HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 80
snmp-agent sys-info
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Description Use snmp-agent packet response dscp to set the DSCP value for SNMP responses. Use undo snmp-agent packet response dscp to restore the default. The default DSCP value for SNMP responses is 0. Examples # Set the DSCP value to 45 for SNMP responses. system-view [Sysname] snmp-agent packet response dscp 45 snmp-agent sys-info Syntax snmp-agent sys-info { contact sys-contact | location sys-location | version { all | { v1 | v2c | v3 }* } } View undo snmp-agent sys-info { contact | location | version { all | { v1 | v2c | v3 }* } } System view Default level 3: Manage level Parameters contact sys-contact: Specifies the system contact, a string of 1 to 200 characters. location sys-location: Specifies the system location, a string of 1 to 200 characters. This information is stored in a management variable in the system group defined in RFC1213-MIB. version: Specifies SNMP versions. • all: Specifies SNMPv1, SNMPv2c, and SNMPv3. • v1: Specifies SNMPv1. • v2c: Specifies SNMPv2c. • v3: Specifies SNMPv3. Description Use snmp-agent sys-info to configure system information for the SNMP agent, including the contact, location, and SNMP versions. Use undo snmp-agent sys-info contact and undo snmp-agent sys-info location to restore the default. Use undo snmp-agent sys-info version to disable an SNMP version. By default, the contact information is null, the location is null, and the version is SNMP v1 SNMP v2c SNMP v3.. Configure the SNMP agent with the same SNMP version as the NMS for successful communications between them. Related commands: display snmp-agent sys-info. Examples # Configure the system contact as Dial System Operator at beeper # 27345. system-view 74