HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 45
info-center logbuffer
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
View System view Default level 2: System level Parameters None Description Use info-center format unicom to set the UNICOM format for system information sent to a log host. Use undo info-center format to restore the default. By default, the format for the system information sent to a log host is HP. System information sent to a log host has two formats: HP and UNICOM. For more information, see Network Management and Monitoring Configuration Guide. Examples # Set the UNICOM format for system information sent to a log host. system-view [Sysname] info-center format unicom info-center logbuffer Syntax info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] * View undo info-center logbuffer [ channel | size ] System view Default level 2: System level Parameters channel-number: Specifies a channel by its number in the range of 0 to 9. channel-name: Specifies a channel by its name, a default name or a self-defined name. For how to configure a channel name, see info-center channel name. buffersize: Specifies the maximum number of log messages that can be stored in the log buffer, in the range of 0 to 1024. Description Use info-center logbuffer to configure information output to the log buffer. Use undo info-center logbuffer to disable information output to the log buffer. By default, the system outputs information to the log buffer through channel 4 (logbuffer), and the default buffer size is 512. The info-center logbuffer command takes effect only when the information center has been enabled with the info-center enable command. 39