HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 108

2 Note: Enter commands in lowercase only; mixed case is for readability. chassisConfig Examples To display the current configuration option on a SilkWorm 48000 director and to change the option: switch:admin> chassisconfig Current Option: 5 All Supported Options (With Blade ID 5 on slots 5-6 Option 1: One 128-port switch (Blade ID 4, 17 on slots 1-4, 7-10, Blade ID 5, 16 on slots 5-6) Option 5: One 384-port switches (Blade ID's 17, 18, 24, 31, 36 in slots 1-4, 7-1, Blade ID 16 in slots 5-6) Please use slotshow to see the Blade IDs currently in the system. switch:admin> chassisconfig 1 This will reboot all the CPs and restore most configuration data to factory defaults. This includes, but is not limited to, port swap, routing, zoning, performance monitoring, port config, fabric watch, management server, time server, snmp, security, fabric and other FabOs configuration parameters. Traffic will be disrupted and both the CPs comes up and will vary in the number of switches and the Blade IDs they recognize based on the configuration selected. Some configuration values are applicable to both single-domain and multiple-domain switches, and are therefore not modified. (Examples: licenses, IP addresses, host and switch names, SSL certificates, PKI certificates.) Please read the man page for further information. Please upload switch 0 configuration... Server Name or IP Address [host]: 192.168.79.240 User Name [user]: ckonchad File Name [config.txt]: Password: Upload complete Are you sure you want to continue? (Y/N): y Current Option changed to 1 Restoring switch 0 configuration to factory defaults... done. (Telnet connection goes down at this point.) See Also configDownload, configUpload, slotShow 2-74 Fabric OS Command Reference Manual Publication Number: 53-1000240-01