HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 560

2 Note: Enter commands in lowercase only; mixed case is for readability. portStatsShow er_zone_discard er_crc_good_eof er_inv_arb open transfer opened starve_stop fl_tenancy nl_tenancy zero_tenancy Class 3 frames discarded due to zone mismatch. CRC error with good EOF (platform and port specific). Invalid ARB. Number of times the FL_Port entered OPEN state. Number of times the FL_Port entered TRANSFER state. Number of times the FL_Port entered OPENED state. Loop tenancies stopped due to starvation. Number of times FL_Port had loop tenancy. Number of times NL_Port had loop tenancy. Number of times zero tenancy occurred. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). [ge]portnumber Specifies a port number to be configured, relative to its slot for bladed systems. Specify the optional ge option to display the GbE port hardware statistics. Use switchShow to display a list of valid ports. ge Displays the GbE statistics. ip Displays all the GbE port statistics related to IP addresses that are on (not zero). Optionally, use ipaddress to display statistics for the specified IP address. fcip Displays the GbE statistics on all FCIP tunnels. Optionally, use tunnelnumber to display statistics for the specified FCIP tunnel. 2-526 Fabric OS Command Reference Manual Publication Number: 53-1000240-01