HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 405

Note: Enter commands in lowercase only; mixed case is for readability. nsShow 2 nsShow Displays local Name Server (NS) information. Synopsis nsshow [-r -t] Description Use this command to display local NS information about devices connected to this switch. The following message is displayed if there is no information in this switch: There is no entry in the Local Name Server The nsAllShow command displays information from all switches. Each line of output displays: Type U for unknown, N for N_Port, NL for NL_Port. PID 24-bit Fibre Channel address. COS List of classes of service supported by device. PortName Device port World Wide Name (WWN). NodeName Device node WWN. TTL Time-to-live, in seconds, for cached entries or NA (not applicable) if the entry is local. This displays if the -r option is given. SCR State change registration of the device. This displays if the -r option is given. Device type Device type if -t is given. Permanent Port Name Physical N_Port or NL_Port WWN. There might be additional lines if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4s supported • IP address • IPA • Port and node symbolic names • Fabric Port Name. This is the WWN of the port on the switch to which the device is physically connected. • Hard address and/or port IP address Note The execution of this command is subject to Admin Domain restrictions that may be in place. Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-371