HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 287

Note: Enter commands in lowercase only; mixed case is for readability. fwMailCfg 2 fwMailCfg Displays and configures Fabric Watch email alerts. Synopsis fwmailcfg Description Use this command to display or modify the configuration and status of the Fabric Watch email alert in the switch. Switch elements monitored by Fabric Watch are divided into classes, and email alerts are based on the classes. Each class can configure one email address as the alert message's receiver. For an email alert to function correctly, add the CP0 and CP1 IP addresses and hostnames to DNS and also set the domain name and name server. The ipAddrShow and dnsConfig commands can be used to set and check this information. Note This command requires a Fabric Watch license. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To configure email settings: switch:admin> fwmailcfg 1 : Show Mail Configuration Information 2 : Disable Email Alert 3 : Enable Email Alert 4 : Send Test Mail 5 : Set Recipient Mail Address for Email Alert 6 : Quit Select an item => : (1..6) [6] 1 Config Show Menu 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class 7 : Alpa Performance Monitor class 8 : End-to-End Performance Monitor class 9 : Filter Performance Monitor class 10 : Security class 11 : Resource class 12 : FRU Class 13 : Quit Select an item => : (0..13) [11] 1 (continued on next page) Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-253