HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 180

2 Note: Enter commands in lowercase only; mixed case is for readability. errFilterSet errFilterSet Sets a filter for an error log destination. Synopsis errfilterset [-d "destination"][-v "severity"] Description Use this command to set a filter for an error log destination. A filter is set based on the severity level of the messages. If no parameters are specified, this command displays the filters that are currently in use. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: -d "destination" Specify the destination to set the filter . "console" is the only valid value at this time. -v "severity" Specify the minimum severity level of the message to pass through the filter. Valid values are "INFO", "WARNING", "ERROR", or "CRITICAL". To display the current filter settings: switch:admin> errfilterset console: filter severity = WARNING To set the filter severity level for the console: switch:admin> errfilterset -d "console" -v "WARNING" See Also errDump, errShow 2-146 Fabric OS Command Reference Manual Publication Number: 53-1000240-01