HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 92

2 Note: Enter commands in lowercase only; mixed case is for readability. cfgClear cfgClear Clears all zone configurations. Synopsis cfgclear Description Use this command to clear all zone information in the transaction buffer. All defined zone objects in the transaction buffer are deleted. If an attempt is made to commit the empty transaction buffer while a zone configuration is enabled, you are warned to first disable the enabled zone configuration or to provide a valid configuration with the same name. After clearing the transaction buffer using the cfgClear command, use the cfgDisable command to commit the transaction and then disable and clear the zone configuration in nonvolatile memory for all the switches in the fabric. If no current zoning configuration exists, use the cfgSave command. If the default zone access mode is "No Access", then this command re-creates the default zoning objects. Note This command requires a Brocade Advanced Zoning license. When security is enabled, this command can be issued only from the primary FCS switch. Operands Examples none To clear all zones and then clear nonvolatile memory: switch:admin> cfgclear The Clear All action will clear all Aliases, Zones, FA Zones and configurations in the Defined configuration. Do you really want to clear all configurations? (yes, y, no, n): [no] n switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] n See Also cfgDisable, cfgEnable, cfgSave 2-58 Fabric OS Command Reference Manual Publication Number: 53-1000240-01