HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 363

Note: Enter commands in lowercase only; mixed case is for readability. linkCost 2 Operands Examples This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, the cost of all ports is displayed. cost Specify the new cost of the link connected to the specified port number. If cost is 0, this port will then revert to its default link cost. This operand is optional. If omitted, this command displays the cost of the specified port. If no operands are specified, the current link costs for all ports on the switch. To display the cost of a link and set that cost: switch:admin> linkcost Slot Interface Cost 2 0 500 (STATIC) 2 1 1000 2 2 500 (STATIC) 2 3 200 (STATIC) 2 4 1000 2 5 1000 2 6 1000 2 7 1000 2 8 1000 2 9 1000 2 10 1000 2 11 (E_PORT) 2000 (STATIC) 2 12 1000 2 13 1000 2 14 1000 2 15 1000 Type to continue, Q to stop: switch:admin> linkcost 2/4 500 switch:admin> linkcost 2/4 Interface2/4 Cost switch:admin> linkcost 2/4 0 switch:admin> linkcost 2/4 500 (STATIC) Interface2/4 Cost 1000 See Also interfaceShow, lsDbShow, topologyShow, uRouteShow, fcrRouterPortCost Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-329