HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 653

Note: Enter commands in lowercase only; mixed case is for readability. slotShow 2 The blade is present, powered on, and running the preboot power on self tests). • INITIALIZING The blade is present, powered on, and initializing hardware components. • ENABLED The blade is on and enabled. • ENABLED (User Ports Disabled) The blade is on but the external ports are disabled using bladeDisable. • DISABLED The blade is powered on but disabled. • FAULTY The blade is faulty because an error was detected. • UNKNOWN The blade is inserted but its state cannot be determined. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To display the status of all slots in the system: switch:user> slotshow Slot Blade Type ID Status 1 SW BLADE 2 FAULTY 2 SW BLADE 2 DISABLED 3 SW BLADE 2 ENABLED 4 SW BLADE 2 DIAG RUNNING POST2 5 CP BLADE 1 ENABLED (User Ports Disabled) 6 CP BLADE 1 ENABLED 7 AP BLADE 24 LOADING 8 SW BLADE 2 DIAG RUNNING POST1 9 SW BLADE 2 INSERTED, NOT POWERED ON 10 UNKNOWN VACANT See Also bladeDisable, bladeEnable, chassisShow, slotPowerOff, slotPowerOn Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-619