HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 57

Note: Enter commands in lowercase only; mixed case is for readability. agtCfgShow 2 value is set to 0, implying that no swEventTrap is sent. Possible values are: • 0 none • 1 critical • 2 error • 3 warning • 4 informational • 5 debug Refer to errShow for related information. The ACL check is as follows: there are six ACLs to restrict SNMP get/set/trap operations to hosts under a host-subnet-area. Host-subnet-area is defined by comparing nonzero IP octets. For example, an ACL of 192.168.64.0 enables access by any hosts that start with the specified octets. The connecting host is enabled to set each host-subnet-area to be read-write or read-only. The highest privilege matched out of six entries is given to the access. The ACL check is turned off when all six entries contain 0.0.0.0. The default values of all six entries are 0.0.0.0. Note When secure mode is enabled, the access control list feature is incorporated into the WSNMP and RSNMP security policies. Community strings can be changed on the primary FCS switch only and will propagate changes across the fabric. Operands none Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-23