HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 569

Note: Enter commands in lowercase only; mixed case is for readability. portTestShow 2 portTestShow Displays information from portTest. Synopsis porttestshow [-ports itemlist] Description Use this command to display a snapshot of information from portTest. The following information displays: • Pass or fail information on a given port. • Port type tested. • Current state of portTest (NO TEST, TESTING, or TEST DONE). • Type of ports asked to test (ALL_PORTS, ALL_E_PORTS, ALL_L_PORTS, ALL_F_PORTS, ALL_LB_PORTS, or SINGLE_PORT). • Pattern used in testing. • Seed used in testing. • User delay value. • Total iteration asked to test. • Current test iteration. • Total fails on this test. • Consecutive fails on this test. • portTest start time. • portTest stop time. • Timeout value. • Error code if any. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operand: -ports itemlist Specify a list of user ports to test. By default, all the user ports in the current slot will be assumed. Refer to itemList help pages for further details. To display information from portTest: switch:admin> porttestshow 1 Port 1 : PASS PortType: OTHER PortInternalState: INIT Pattern: 0x0 Seed: 0x0 TotalIteration: 0 TotalFail: 0 StartTime: NONE StopTime: NONE Timeout: 0 PortState: NO TEST PortTypeToTest: NO_TEST UserDelay: 0 CurrentIteration: 0 ConsecutiveFail: 0 ErrorCode: 0 Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-535