HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 591

Note: Enter commands in lowercase only; mixed case is for readability. secFabricShow 2 secFabricShow Displays security-related fabric information. Synopsis secfabricshow Description This command displays the security-related information about the fabric. The information displayed is as follows: Role Displays whether the switch is the primary FCS, backup FCS, or not FCS. WWN Displays the World Wide Name of the switch. DId Displays the domain of the switch. Status Displays the security state of the switch: Ready This switch is in a stable state. Busy This switch is updating its security database. Error This switch's security database is inconsistent with the primary FCS. Enet IP Addr Displays the Ethernet IP address. Name Displays the switch name. NoResp Displays if the switch did not respond to the status query. Unknown Displays if the switch is in an unknown state. Note This command can only be issued in secure mode. This command must be issued from a sectelnet or SSH session. When this command is issued on multiple switches in the fabric, one or more of these switches can display a status of busy. Operands Examples none To display security-related fabric information on the primary FCS switch: switch:admin> secfabricshow Role WWN DId Status Enet IP Addr Name non-FCS 10:00:00:60:69:10:03:23 1 Ready 192.168.100.148 "nonfcs" Backup 10:00:00:60:69:00:12:53 2 Ready 192.168.100.147 "backup" Primary 10:00:00:60:69:22:32:83 3 Ready 192.168.100.135 "switch" Secured switches in the fabric: 3 See Also secPolicyDump, secPolicyShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-557