HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 232

2 Note: Enter commands in lowercase only; mixed case is for readability. fcrPhyDevShow fcrPhyDevShow Displays the FC Router physical device information. Synopsis fcrphydevshow [-a][-f fabricid][-w wwn][-c][-d] Description Use this command to display the physical (real) devices that are configured to be exported to other fabrics. A device is considered to be configured to be exported to another fabric if it is a member of an LSAN zone. The device is displayed only if it is discovered in the EX_Port-attached fabric and backbone fabric's name server (for instance, the device is online). Physical device information is available only for physical devices that exist in fabrics attached to EX_Ports of FC Routers on the same backbone fabric as this FC Router. The default output displays only physical device information relevant to this FC Router. Relevant physical devices include physical devices that are configured to be exported from fabrics attached to this FC Router's EX_Ports. The physical devices are listed by fabric. The -f and -w operands allow searching for physical devices based on fabric ID or port World Wide Name. "No device found" is displayed if there is no physical device information available at this FC Router. Each line of the output displays: Device Exists in Fabric The fabric in which the physical device exists. WWN The World Wide Name of the device port. Physical PID The port ID of the physical device. This port ID is only relevant on the fabric specified by the "Device Exists in Fabric" column. Operands This command has the following operands: -a Displays all physical devices for all FC Routers in the same backbone fabric whether or not they are relevant to this FC Router. -a -f fabricID Display physical devices in the specified fabric for all FC Routers in the same backbone fabric whether or not they are relevant to this FC Router. -w wwn Displays the physical devices with the specified port WWN. -c Clears login-related counters. -d Displays login related counters in (,) format. Login try counter represents the number of times the device has attempted login. Local failure counter represents the number of times the device login failed due to missing LSAN zones within the device's fabric. Remote failure counter represents the number of times the device login failed due to missing LSAN zones within the remote fabric. Counters are cleared upon reboot or failover. 2-198 Fabric OS Command Reference Manual Publication Number: 53-1000240-01