HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 426

2 Note: Enter commands in lowercase only; mixed case is for readability. perfAddIPMonitor perfAddIPMonitor Adds a filter-based performance monitor for IP frame count. Synopsis perfaddipmonitor [slotnumber/]portnumber [alias] Description Use this command to define filter-based monitors to count the number of IP traffic frames. Only frames transmitted are counted. After a successful execution of this command, a monitor number is displayed. The monitor number is provided for manipulation of these filter-based performance monitors. The optional user-defined alias is also displayed, if one is specified. All valid monitor numbers and user-defined aliases can be displayed with the perfShowFilterMonitor command. Note This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands The operands are as follows: slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. alias Specify a name for this monitor. This string truncates to a maximum of 10 characters. It might be surrounded by quotation marks, in order to include spaces. This operand is optional. The default alias is "IP Frame". Examples To add an IP monitor to a port: switch:admin> perfaddipmonitor 1/4 "IP_MONITOR" IP traffic frame monitor #0 added See Also perfAddEEMonitor, perfAddReadMonitor, perfAddRWMonitor, perfAddSCSIMonitor, perfAddUserMonitor, perfAddWriteMonitor 2-392 Fabric OS Command Reference Manual Publication Number: 53-1000240-01