HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 161
diagPost, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Note: Enter commands in lowercase only; mixed case is for readability. diagPost 2 diagPost Sets or displays diagnostic POST configuration. Synopsis diagpost [mode | -show] Description Use this command to enable or disable POST testing. The mode is saved in flash memory (and stays in that mode) until the next execution of diagPost. The mode becomes active as soon as this command is executed; it does not require a reboot to take effect. POST mode modifies the behavior of the diagnostics daemon program to inhibit testing of switch blades when the system is first powered on or a new blade is added. Note To enable or disable diagnostic POST, the recommended method is to use diagEnablePost and diagDisablePost. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: mode Specify 1 to enable, 0 to disable POST test. This operand is optional. -show Specify this operand to display the current mode. This operand is optional. If no operand is specified, the current value is displayed. To enable and then disable the POST test: switch:admin> diagpost Diagnostic POST is currently disabled. switch:admin> diagpost 1 Config update Succeeded Diagnostic POST is now enabled. See Also diagDisablePost, diagEnablePost Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-127