HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 771

Note: Enter commands in lowercase only; mixed case is for readability. zoneDelete 2 zoneDelete Deletes a zone. Synopsis zonedelete "zonename" Description Use this command to delete a zone. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to flash memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Note This command requires a Brocade Advanced Zoning license. When secure mode is enabled, this command can be issued only from the primary FCS switch. Operands Examples This command has the following operand: "zonename" Name of the zone to be deleted, in quotation marks. This operand is required. To delete the zone "Blue_zone": switch:admin> zonedelete "Blue_zone" See Also zoneAdd, zoneCreate, zoneRemove, zoneShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-737