HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 781
Extended Fabrics Command, Fabric Watch Commands
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 781 highlights
3 Note The Fabric Assist Mode is only available on Fabric OS v2.6.x and v3.x systems in the fabric; it is not supported on Fabric OS v4.x or v5.x. Extended Fabrics Command The following command is available with the purchase of a Brocade Extended Fabrics license key. Table 3-3 Extended Fabrics Commands Command Description portCfgLongDistance Configures a port to support long-distance links. Fabric Watch Commands The following commands are available with the purchase of a Brocade Fabric Watch license key. Table 3-4 Fabric Watch Commands Command Description fanShow fwAlarmsFilterSet fwAlarmsFilterShow fwClassInit fwConfigReload fwConfigure fwFruCfg fwMailCfg fwPortDetailShow fwSamShow fwSet fwSetToCustom fwSetToDefault fwShow sensorShow Displays fan status and speed. Enables or disable alarms for Fabric Watch. Displays alarm filtering for Fabric Watch. Initializes all classes under Fabric Watch. Reloads the Fabric Watch configuration. Displays and enable modification of the Fabric Watch configuration and status. Displays and changes FRU state alert configuration. Configures email alerts in Fabric Watch. Displays the port information for specified user ports. Displays switch availability monitor information. Sets the parameters controlled by Fabric Watch. Sets boundary and alarm levels to custom values. Sets boundary and alarm levels to the default values. Displays the thresholds monitored by Fabric Watch. Displays sensor readings. Fabric OS Command Reference Manual 3-3 Publication Number: 53-1000240-01