HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 466

2 Note: Enter commands in lowercase only; mixed case is for readability. portBufferShow Operands Examples The operands are as follows: slotnumber For bladed systems only, specifies the slot number of the port group to display, followed by a slash (/). portnumber Specifies the number of a port associated with the port group to display, relative to its slot for bladed systems. Use switchShow for a list of valid ports. This operand is optional; if omitted, this command displays the long distance buffer information for all the port groups of the switch. In the case where this command displays information for all the port groups of the switch, a divider line displays between the ports of each port group to assist in readability. To display the long distance information a port: switch:user> portbuffershow 17 User Port Lx Max/Resv Buffer Needed Link Remaining Port Type Mode Buffers Usage Buffers Distance Buffers 16 - - 0 - - 17 E L1 - 54 54 50km 18 - - 0 - - 19 - - 0 - - 54 See Also portCfgLongDistance 2-432 Fabric OS Command Reference Manual Publication Number: 53-1000240-01