HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 577

Note: Enter commands in lowercase only; mixed case is for readability. reboot 2 reboot Reboots either one control processor (CP) or the entire system. Synopsis reboot Description Use this command to immediately reboot a CP in a director or an entire switch. The command line session is closed. When this command is issued on a single-CP system, all switches in the system are entirely shut down and all Fibre Channel ports become inactive until the system restarts. When this command is issued on the active CP of a dual-CP system, the active CP reboots, the standby CP takes over as the active CP, and all Fibre Channel ports become inactive until the new active CP reinitializes these ports. If this switch is part of a fabric, reboot the switch so that the remaining switches reconfigure. When this command is issued on the standby CP, high availability (HA) synchronization is lost until the standby CP successfully restarts. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To reboot the CP: switch:admin> reboot Rebooting... See Also fastboot, switchReboot Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-543