HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 735

Note: Enter commands in lowercase only; mixed case is for readability. traceFtp 2 traceFtp Displays, enables, or disables the trace auto-FTP, or retrieves the trace dump file. Synopsis traceftp [-S] traceftp -e traceftp -d traceftp -n [-s slot][-h hostip][-u username][-p password][-d remotedirectory][-f remotefile] Description Use this command to display, enable, or disable trace auto-FTP or to retrieve a trace dump file from the switch to the FTP site immediately. Note If there is no parameter specified, this command defaults to traceFtp -S. Default remote file name format for traceFtp -n is switchname-S#-YYYYMMDDHHMMSS.dmp, where # is the slot number (0 if it is on nonbladed system), and YYYYMMDDHHMMSS is trace dump time (yearmonth-day-hour-minute-second). If non-blade system has an embedded BP, two trace dumps will be generated, one with .dmp for the main switch and one with .tar.gz for the embedded BP. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following mutually exclusive options: -S Displays trace auto-FTP feature. -e Enables trace auto-FTP feature. -d Disables trace auto-FTP feature. -n Retrieves a trace dump file from the switch immediately. This option does not work on the standby CP. Use supportSave on the standby CP to retrieve trace dumps as an alternative. The -n option has the following optional operands: -s slot Specifies the slot number from which a trace dump is generated. If this is not supplied, the trace dump is generated from the local slot. -h hostip Specifies FTP host IP address. It must be IP address. hostip should be less than 48 characters. -u username Specifies FTP user name. username should be less than 48 characters. -p password Specifies FTP user password. If the user name is anonymous, the password is not needed. password should be less than 48 characters. -d remotedirectory Specifies the remote directory which to store a trace dump file. traceFtp cannot take a slash ( / ) as a directory name. remotedirectory should be less than 48 characters. -f remotefile Specifies the remote file which to store a trace dump file. remotefile should be less than 48 characters. Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-701