HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 343

Note: Enter commands in lowercase only; mixed case is for readability. iscsiPortCfg 2 iscsiPortCfg Displays or modifies iSCSI port parameters. Synopsis iscsiportcfg --clearstats slot/geport iscsiportcfg --default slot/geport iscsiportcfg --show slot/geport [-v] iscsiportcfg --modify slot/geport options Description Use this command to display or modify the iSCSI port parameters. The following table lists the default iSCSI port settings. Setting Default Error recovery level 0 Connections per session 1 Data digest support Disabled Header digest support Disabled Immediate data support No First burst length value 512 Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: --modify Modifies the port parameters on the specified port. Valid options are: • -e value Specifies the error recovery level; values are 0, 1, or 2. • -c value Specifies the number of connections per sessions; values are 1 or 2. • -d value Enables or disables data digest support; specify 0 to disable or 1 to enable. • -a value Enables or disables header digest support; specify 0 to disable or 1 to enable. • -i value Enables or disables immediate data support; specify 0 to disable or 1 to enable. • -f value Specifies the first burst length value; values include 512, 1024, 2048, 4096, 8192, 16384, and 32768. --clearstats Clears port-level iSCSI statistics on the specified port. --default Resets the port to the default values. See the "Description" section for the list of default values. Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-309