HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 37

Note: Enter commands in lowercase only; mixed case is for readability. aaaConfig 2 Examples --radiusonly Enable authentication via the RADIUS configuration only. This is used to select the RADIUS configuration as the primary AAA service. To enable a RADIUS configuration, as least one server must exist in the configuration. --radiuslocal Enable the current RADIUS configuration as the primary AAA service and the switch-local database as the secondary AAA service. When enabled, if RADIUS authentication fails, the switch-local database will be accessed for AAA services. --radiuslocalbackup Enable the current RADIUS configuration as the primary AAA service and the switch local database as the backup AAA service. When enabled, if RADIUS authentication fails, requests for AAA services are denied. If the RADIUS server times out, requests are sent to the switch-local database. To display the current RADIUS configuration: sw:admin> aaaconfig --show Position ServerPortSecret Timeout(s) Auth-Protocol 1 192.168.233.48 1812 sharedsecret 3 2 192.168.233.44 1812 sharedsecret 3 3 radserver 1812 private 5 CHAP CHAP CHAP Primary AAA Service: Switch database Secondary AAA Service: None To change the configuration for server 192.168.233.48: switch:admin> aaaconfig --change 192.168.233.48 -p 3002 -s newsecret -t 1 See Also none Fabric OS Command Reference Manual 2-3 Publication Number: 53-1000240-01