HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 160

2 Note: Enter commands in lowercase only; mixed case is for readability. diagModeShow diagModeShow Displays diagnostic mode configuration. Synopsis diagmodeshow Description Use this command to display the current settings for several diagnostic configuration parameters. This command is most often used by burn-in scripts to display a summary of the configuration settings that were in effect when the script was run. Note Any automated use of this command should rely only on the names of the specific variables, not on their exact positions in the output. Earlier versions of this command listed diag.mode.burnin.nExec instead of Burnin nExec and diag.mode.burnin.nExec instead of Burnin passnum. You can issue this command on the FR4-18i blade in a SilkWorm chassis; however, the command is not supported by the SilkWorm platform and does not effect any other feature operations. This availability is offered to maintain consistency across a mixed-blade environment. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To display the diagnostic mode: switch:admin> diagmodeshow diag.mode* parameters saved in flash: diag.mode.burnin diag.mode.burnin.level diag.mode.burnin.firstPowerUp diag.mode.esd diag.mode.gbic diag.mode.splb diag.mode.lab diag.mode.mfg diag.mode.bplb diag.ports Burnin passnum Burnin nExec Silkworm Mode Disable Modes Print = 0 = 0 = Thu Feb 28 01:36:12 2002 = 0 = 0 = 0 = 0 = 0 = 0 = TEST (type=INDEX, sz=512): 100. = 1 = 0 = OFF = OFF See Also burninLevel, setEsdMode, setGbicMode, setSplbMode 2-126 Fabric OS Command Reference Manual Publication Number: 53-1000240-01