HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 463

Note: Enter commands in lowercase only; mixed case is for readability. portAlpaShow 2 portAlpaShow Displays the Arbitrated Loop Phyiscal Addresses (AL_PAs) of devices attached to a port. Synopsis portalpashow [slotnumber/]portnumber Description Use this command to display the AL_PAs of devices connected to a port, and whether these devices are public or private. If the specified port is not an active FL_Port or if no AL_PAs are present, this command prints an error. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. To display the AL_PAs of a port: switch:user> portalpashow 4/14 AL_PA type AL_PA type 0xe2 public 0xe4 public AL_PA type See Also switchShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-429