HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 266

2 Note: Enter commands in lowercase only; mixed case is for readability. firmwareDownloadStatus firmwareDownloadStatus Displays the status of a firmware download. Synopsis firmwaredownloadstatus Description Use this command to display an event log that records the progress and status of the current firmwareDownload command. The event log is created by the current firmwareDownload command and is kept until another firmwareDownload command is issued. There is a timestamp associated with each event. In systems with two control processor (CP) cards, when firmwareDownloadStatus is run, the event logs in the two CPs are synchronized. The command can be run from either CP. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To display the status of a firmware download on a SilkWorm switch: switch:admin> firmwaredownloadstatus [1]: Fri Feb 15 22:17:03 2008 Firmware is being downloaded to the switch. This step may take up to 30 minutes. [2]: Fri Feb 15 22:20:54 2008 Firmware has been downloaded to the secondary partition of the switch. [3]: Fri Feb 15 22:22:19 2008 The firmware commit operation has started. This may take up to 10 minutes. [4]: Fri Feb 15 22:22:51 2008 Switch is relocating an internal firmware image. [5]: Fri Feb 15 22:25:15 2008 The commit operation has completed successfully. [6]: Fri Feb 15 22:25:46 2008 The internal firmware image is relocated successfully. [7]: Fri Feb 15 22:25:46 2008 Firmwaredownload command has completed successfully. Use firmwareshow to verify the firmware versions. 2-232 Fabric OS Command Reference Manual Publication Number: 53-1000240-01